Mustang Cobra V8-281 4.6L DOHC VIN V MFI (1997)
4. Using a press, place flywheel housing on Axle Bearing Seal Plate T75L-1165-B, transmission case side down. Insert Guide Tube Replacer
T96P-7050-A release bearing tube, press out guide tube.
NOTE: Only remove release bearing guide tube if damaged. Wear-through of black coating is normal.
ASSEMBLY
1. Liberally apply Stud and Bearing Mount EOAZ-19554-BA or equivalent to outer diameter of release bearing guide tube cup. Using Axle Bearing
/Seal Plate T75L-1165B and Guide Tube Replacer as shown, place release bearing guide tube on Guide Tube Replacer flared side down.
