Mustang GT V8-4.6L SOHC VIN X (1998)
Floor Control Panel Switches
REMOVAL and INSTALLATION
1. Disconnect battery ground cable.
2. Remove console finish panel by carefully prying up from retaining clips. Disconnect electrical connectors.
3. Remove two rubber bumpers, two screws and glove compartment from console panel.
4. Remove four mounting screws (two at front of console panel at the instrument panel and two under console glove compartment).
5. Move parking brake control to upright position.
6. Position the gearshift lever into 1.
7. Move console panel up and back and disconnect console panel wiring harness connectors.
8. Remove console panel from vehicle.
