Mustang GT V8-4.6L SOHC VIN X (1998)
Seat Cushion: Service and Repair
Cushion Cover and Pad - Front Seat
REMOVAL
1. Remove the front seat. Place the seat on a clean surface.
2. Remove the front seat track from the front seat cushion frame and spring.
3. Remove the front seat back latch lower cover.
4. Disconnect the front seat adjusting motor drive tube at the joint located on the inboard side near the seat back hinge, if equipped.
5. Remove the screws retaining the front seat back frame to the front seat cushion frame and spring.