Mustang GT V8-4.6L SOHC VIN X (1998)
Camshaft: Testing and Inspection
Cleaning and Inspection
CLEANING
Clean the camshaft in solvent and wipe it dry.
Remove light scuffs, scores or nicks from the camshaft-machined surfaces with a smooth oil stone.
Replace the camshaft if camshaft journals are excessively worn or scored. The cylinder head bearing journals can be refinished to accommodate 0.5
mm (0.020 inch) oversize camshaft. If the cylinder head journals cannot be bored out 0.5 mm (0.020 inch), replace cylinder head.
INSPECTION
Check camshaft bores for size, taper, roundness, alignment and finish. If any of these exceed the limits given in Specifications, install new camshaft
bearings rebore cylinder head to accept oversize camshaft or replace cylinder head.