Mustang GT V8-4.6L SOHC VIN X (1998)
Crankshaft Gear/Sprocket: Service and Repair
REMOVAL
1. Remove camshaft timing chains and timing chain tensioners.
2. Remove crankshaft sprockets from crankshaft.
3. Remove camshaft sprocket retaining bolts, washers, camshaft sprockets and camshaft sprocket spacers.
NOTE: Cam Positioning Tool Adapters 303-413 (T92P-6256-A) and Cam Positioning Tool 303-380 (T91P-6256-A) must be installed on
camshafts to prevent camshafts from rotating.
4. Inspect crankshafts and camshaft sprockets for wear or damage and replace as required.
CAUTION: Do not rotate crankshaft or camshafts as possible damage to engine may occur.
INSTALLATION
1. Position camshaft sprocket spacers and camshaft sprockets on camshafts.
NOTE: Cam Positioning Tool Adapters 303-413 (T92P-6256-A) and Cam Positioning Tool 303-380 (T91P-6256-A) must be installed on
camshafts to prevent camshafts from rotating.
2. Install washers and camshaft sprocket retaining bolts. Do not tighten at this time.
Fig. 26 Crankshaft Sprocket Position
3. Install crankshaft sprockets onto crankshaft.
NOTE: Crankshaft sprockets are identical. They may only be installed one way.
4. Install camshaft timing chains and timing chain tensioners.
