Mustang GT V8-4.6L SOHC VIN X (1998)
14. Lubricate timing chain tensioner arm contact surfaces with clean engine oil and install RH and LH timing chain tensioner arms on their dowels.
15. With a suitable C-clamp around the timing chain tensioner arm and timing chain guide, remove all slack from timing chain. Use caution not to
bend the timing chain guide.
16. Remove lock pins from timing chain tensioners and make sure all timing marks are aligned.
17. Using Cam Positioning Tool Adapters 303-413 (T92P-6256-A) and Cam Positioning Tool 303-380 (T91P-6256-A), align camshaft, tighten
camshaft sprocket bolt to 110-130 Nm (81-95 ft. lbs.).
18. Install Dial Indicator with Bracketry Tool-4201-C or equivalent in cylinder No. 1 spark plug hole. Check that camshaft is at maximum lift for the