Mustang GT V8-4.6L SOHC VIN X (1998)
Exhaust Pipe/Muffler Hanger: Service and Repair
Muffler Hanger
REMOVAL
1. Raise vehicle on hoist.
2. Depending on application, remove exhaust hanger insulators from muffler or mufflers.
NOTE: Support exhaust system with a suitable jack stand.
3. Remove muffler pipe bracket retaining bolts and muffler pipe bracket.
INSTALLATION
1. Follow removal procedure in reverse order.
NOTE: For ease of assembly, lubricate exhaust hanger insulators with Silicone Lubricant D7AZ-19553-AA or equivalent meeting Ford
specification ESR-M13P4A prior to installation of mufflers.
2. Tighten muffler pipe bracket retaining bolts to 15-20 Nm (11-14 ft. lbs.).