Ford Workshop Service and Repair Manuals > Mustang GT V8-4.6L SOHC VIN X (1998) > Transmission and Drivetrain | Automatic Transmission/Transaxle | Thrust Washer/Bearing, A/T | Component Information | Service and Repair | Thrust Bearings Cleaning and Inspection

Page 3

8. Install Output Shaft Speed Sensor (OSS). Tighten bolt to 7-10 Nm (62-88 inch lbs.).

9. Install manual control [ever seal using Shift Lever Seal Replacer 307-050 (T74P-77498-A).

10. Install EPC solenoid.

Ford Workshop Service and Repair Manuals