Mustang GT V8-4.6L SOHC VIN X (1998)
11. If removed, install new extension housing bushing using Extension Housing Bushing Replacer 307-075 (T80L-77034-A).
12. Install new extension housing gasket (7086) and extension housing. Tighten bolts to 25-30 Nm (19-22 ft. lbs.).
13. Install extension housing seal using Extension Housing Seal Replacer 307-013 (T61L-7657-13).
14. Position manual valve detent lever and parking lever actuating rod into case. Parking lever actuating rod must be positioned over parking pawl.
15. Slide manual control lever into case and position through detent. Install nut and tighten to 26-37 Nm (20-27 ft. lbs.).
16. Install manual lever shaft retaining pin.
