Mustang GT V8-4.6L SOHC VIN X (1998)
27. Tighten the 25 main control valve body-to-case bolts to 9-11 Nm (80-97 inch lbs.).
28. Connect the molded lead frame to the sensors.
^
Connect the bulkhead inter-connector.
^
Connect the Electronic Pressure Control (EPC).
^
Connect the Torque Converter Clutch (TCC).
^
Connect the shift solenoid SSA/SS1 and SSB/SS2.
29. Install new filter and grommet.
