Mustang GT V8-4.6L SOHC VIN X (1998)
30. Install digital Transmission Range (TR) sensor on manual control lever and loosely install bolts.
31. NOTE: PARK is the last detent when the manual control lever is full forward. Return two detents toward output shaft for NEUTRAL.
Position manual control lever in NEUTRAL.
Insert Digital Transmission Range (TR) Sensor Tool 307-351 (T97L-7001O-A) into slots. Align all three slots on digital Transmission Range
(TR) sensor with three tabs on tool.
32. Tighten digital Transmission Range (TR) sensor bolts to 7-10 Nm (62-88 inch lbs.).
33. NOTE: Transmission oil pan to case gasket is reusable if not damaged.
Clean, inspect and install pan-to-case gasket and transmission pan. Tighten all bolts to 12-15 Nm (107-132 inch lbs.).