Mustang GT V8-4.6L SOHC VIN X (1998)
Universal Joint: Component Tests and General Diagnostics
Special Tool
1. Raise the vehicle on a hoist that supports the rear axle (twin-post hoist).
2. Remove the driveshaft assembly.
3. Check the circular rear axle universal joint flange for damage.
4. Position Companion Flange Runout Gauge 205-319 (T92L-4851-B) on flange pilot.
5. Install Clamp Plate 205-320 (T92L-4851-C) on runout gauge.
