Probe L4-133 2.2L SOHC Turbo (1989)
Electronic Spark Control Module: Service and Repair
REMOVAL:
1.
Disconnect the negative battery cable.
Knock Control Module
2.
Remove the attaching screws and nuts from the module housing at the module retaining bracket.
Knock Control Module Electrical Connector
3.
Disconnect the electrical connector from the module and remove the module.
INSTALLATION:
1.
Connect the electrical connector to the module housing.
2.
Position the module under the retaining bracket and install the attaching screws and nuts.
3.
Connect the negative battery cable.
