Probe L4-133 2.2L SOHC Turbo (1989)
Throttle Body - Exploded View
1.
Install the new gasket and position the throttle body onto the intake plenum.
2.
Install the attaching nuts to 14-19 lb. ft. (19-25 N-m).
3.
Install the coolant line/EGR hose retaining bracket and the engine lifting bracket.
4.
Connect the throttle position sensor connector, idle switch connector and bypass air control valve connector.
5.
Install all vacuum and coolant hoses to the throttle body in their proper location as noted during removal.
6.
Install the air duct.
7.
Install the accelerator cables.
8.
Connect the negative battery cable.
