Probe V6-153 2.5L DOHC (1994)
Exploded View Of Main And Rear Valve Bodies
NOTE: Refer to the Exploded View Of Front And Premain Valve Bodies and the Exploded View Of Main And Rear Valve Bodies during
disassembling and assembling procedures.
CAUTION: Each valve body bolt has a letter on the bolt head which matches the letter placed near the bolt hole.
NOTE: Shift solenoid valves are serviced separately from the valve body.
1. Using transaxle oil temperature sensor remover/replacer tool No. T92C- 77000-AH or equivalent, remove transaxle oil temperature sensor.
2. Remove line pressure solenoid, torque converter clutch solenoid, and downshift solenoid.
3. Remove 1-2 shift solenoid and torque converter clutch control solenoid.
4. Remove fluid strainers and 0-rings.
5. Remove front valve body bolts, front valve body, front gasket, front separator plate, and premain front gasket.
