Probe V6-153 2.5L DOHC (1994)
Valve Body Spring Specifications
5. Inspect and measure all springs for outer diameter and free length, as shown in the Valve Body Spring Specifications image.
6. Reverse procedure to assemble. Apply automatic transaxle fluid to all parts and bores.
Overhaul Rear Control Body
Exploded View Of Rear Control Body
1. Disassemble rear control body as shown in the Exploded View Of Rear Control Body image.
2. Clean all parts thoroughly in clean solvent as necessary and blow dry with compressed air.
3. Inspect all valve and plug bores for scores and all fluid passages for obstructions.
4. Ensure dry valves and plugs fall from their own weight into their respective bores.
5. Roll manual valve on flat surface to check for bent condition. Replace if necessary.
