Probe V6-153 2.5L DOHC (1994)
Main Valve Body Check Ball And Fluid Strainer Locations
1. Install three fluid strainers and seven check balls into main valve body and four fluid strainers and two check balls into rear valve body.
2. Install new main rear gasket, rear separator plate, and new rear gasket on rear valve body.
CAUTION: Do not confuse main rear gasket with rear gasket. Ensure bolt head letters to letters on valve body.
3. Install rear valve body onto main control valve body, then hand tighten bolts.
Main Valve Body Check Ball And Fluid Strainer Locations
4. Install fluid strainer and check ball into main valve body.
