Probe V6-153 2.5L DOHC (1994)
Clutch Disc: Service and Repair
REMOVAL
1. Disconnect battery ground cable.
2. Remove transaxle from vehicle.
NOTE: To avoid dropping the clutch disc when the bolts are removed, use clutch aligning tool No. T71P-7137-H or equivalent for 2.2L/4-133
turbo and 3.0L/V6-182 models or tool No. T74P-7137-K or equivalent on 1992 non-turbocharged models and all 1993-1996 models.
3. On Probe models, install flywheel lock tool No. T84P-6375-A or equivalent, into transaxle mounting hole on the engine, then engage the tooth of
the locking tool into the flywheel ring gear.
NOTE: To avoid dropping clutch disc when bolts are removed, use clutch aligning tool No. T87C-7137-A or equivalent.
4. On Capri models, install flywheel lock tool No. T74P-6375-A or equivalent, into transaxle mounting hole on engine, then engage tooth of locking
tool into flywheel ring gear.
Clutch Assembly (Probe)
