Probe V6-153 2.5L DOHC (1994)
Axle Shaft: Service and Repair
Front Axle Bearing and Inboard Halfshaft - RH Side
Removal
1. Remove the outboard, RH front wheel driveshaft and joint. Remove the outboard half only.
2. Remove the three front axle bearing bracket bolts.
3. Carefully pry the halfshaft from the differential.
4. Remove the halfshaft from the vehicle.
5. Install Transaxle Plugs T88C-7025-AH into the transaxle.
CAUTION: Transaxle Plugs T88G7025-AH must be used to prevent differential side gear misalignment on MTX and 4EAT equipped vehicles,
and fluid leakage on all transaxles.
