Probe V6-153 2.5L DOHC (1994)
Transmission Position Switch/Sensor: Adjustments
1.
Disconnect the battery ground cable.
2.
Remove the engine air cleaner.
Manual Lever Position Switch
3.
Remove the transmission shift cable and bracket from the manual control shift outer lever. Use a screwdriver or suitable tool to pry the transmission
shift cable from the manual control shift outer lever.
4.
Disconnect the Manual Lever Position (MLP) switch electrical connector.
Manual Lever Position Switch
5.
Rotate the MLP switch shaft to the neutral mark.
6.
Loosen the MLP switch bolts.
Manual Lever Position Switch
7.
Use a Rotunda 73 Digital Multimeter 105-00051 or equivalent and ensure that there is continuity between the terminals.
