Probe V6-182 3.0L (1990)
Figure 3
10.
Remove the broken piece of plastic cable end, Figure 3.
a.
Lay the antenna motor on a flat surface with the black cover facing up.
b.
Remove the retainer nut, cover, "O" ring, drive mechanism and white cover plate.
c.
Locate and remove the broken piece of plastic cable end.
d.
Reinstall the parts and install the motor assembly.
PART NUMBER
PART NAME
CLASS
E92Z-18A886-B
Antenna Mast
C
OTHER APPLICABLE ARTICLES: 89-2-6
WARRANTY STATUS: Eligible Under Basic Warranty
Coverage