ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Parking Brake Warning Indicator Switch > < Parking Brake Cable Adjustment

Puma 1998 (06.1997-12.2001)

Parking Brake and Actuation - Parking Brake Control Puma 1998 (06/1997-12/2001)
Removal and Installation

Removal

  1. Remove the parking brake control cover trim.
  1. Lower the parking brake control lever.

  1. Remove the adjusting nut.

  1. Remove the parking brake control nuts.

  1. Pull the cable out from the parking brake control lever.

  1. Remove the parking brake control.
    1. Disconnect the parking brake warning indicator switch electrical connector.
    1. Remove the parking brake control.

Installation
  1. To install, reverse the removal procedure.
  1. Adjust the parking brake cable.
    For additional information, refer to Parking Brake Cable Adjustment in this section.

Parking Brake Warning Indicator Switch > < Parking Brake Cable Adjustment