Removal and Installation | -
Disconnect the negative battery cable. | | -
Shift the selector lever to the P position. | 4. Remove the components in the order indicated in the following illustration(s) and table(s). 1 - Digital TR sensor insulator 5. To install, reverse the removal procedure. Installation Details Item 3 : Selector cable | -
Shift the selector lever to the N position. | | -
Loosen the nut at approx. 90°. | | -
Adjustment the end of the selector cable position. | | -
Tighten the nut. - Tightening torque 9.8—18.2 N·m {100—185 kgf·cm, 87—161 in·lbf}
| |