ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

307-01 Automatic Transmission-Transaxle|Description and Operation > < Powertrain Control Module (PCM)
Automatic Transmission/Transaxle - Specifications Ranger 2006.5 (05/2006-)

Item Specification
Transmission Type 5R55S
Transmission Control Floor-shift
Gear ratio 1 GR 3.22
2 GR 2.29
3 GR 1.55
4 GR 1.00
5 GR 0.71
Reverse 3.07
ATF Type Mercon®V
Capacity 9.93 L
Hydraulic System (Numberof drive/driven gear plates) Forward clutch 5/5
Coast clutch 2/2
Direct clutch 5/5

Band Adjustment and Torque Chart

Description Number of Turns to Back Off Locknut Adjusting Screw
Nm Lb-Ft Nm Lb-Ft
Intermediate Band 2.0 54 40 14 10
Overdrive Band 2.0 54 40 14 10

Torque Specifications

Description Nm lb-ft lb-in
Case-to-center support bolt 11 8
Digital transmission range (TR) sensor screws 8 71
Extension housing screws 30 22
Fluid level indicator plug-to-drain pipe assembly 10 89
Fluid pan drain plug 26 19
Fluid pump housing-to-case screws 22 16
Locknut for band adjustment screw 54 40
Main control-to-case screws (all) 10 89
Manual control valve detent spring screw 10 89
Manual control lever shaft nut 48 35
Band adjustment screw 13 10
Pressure tap plug-to-case 14 10
Fill plug 20 15
Reverse servo assembly screws 11 8
Separator-to-main control screws 7 62
Shift cable bracket screws 40 30
Solenoid body screws 8 71
Speed sensor screws 14 10
Torque converter adapter plate-to-converter nuts 40 30
Torque converter adapter plate-to-flexplate nuts 40 30
Transmission cooler fitting-to-case 47 35
Transmission cooler tube nut-to-case fitting 40 30
Transmission fluid filter screws 10 89
Transmission fluid pan-to-case screws 11 8
Transmission mount-to-extension housing screws 90 66
Transmission mount-to-crossmember nuts 90 66
Transmission-to-engine screws 48 35
Vehicle harness-to-solenoid body screw 5 44

307-01 Automatic Transmission-Transaxle|Description and Operation > < Powertrain Control Module (PCM)