ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
General Procedures|Removal and Installation > < Transmission Fluid Cooler

Ranger 2006.5 (05.2006-)

Automatic Transmission/Transaxle External Controls - Selector Lever Cable Adjustment Ranger 2006.5 (05/2006-)
General Procedures

  1. Remove the console.
  1. Shift the selector lever to the N position.

  1. Loosen the nut at approx. 90°.

  1. Adjustment the end of the selector cable position.

  1. Tighten the nut.
    • Tightening torque 9.8—18.2 N·m {100—185 kgf·cm, 87—161 in·lbf}

  1. Install the console.

General Procedures|Removal and Installation > < Transmission Fluid Cooler