Ranger 2WD V6-4.0L (2010)
Radio/Stereo: Service and Repair
Audio Unit
Audio Unit
Removal and Installation
CD6
1. NOTICE: Before removing the audio unit, it must be placed in shipment mode. Failure to follow this instruction may result in damage to
the audio unit.
Put the audio unit in shipment mode. For additional information, refer to Audio Unit Shipment Mode See: Cellular Phone/Communications
Control Module/Service and Repair/Audio Unit Shipment Mode.
All audio units
2. Using the special tool, remove the audio unit.
-
Disconnect the electrical connector(s) and the antenna cable.
3. To install, reverse the removal procedure.
