Ranger 2WD V6-4.0L (2010)
12. Using Motorcraft(R) High Temperature Nickel Anti-Seize Lubricant XL-2 or equivalent, lubricate the parking brake adjuster threads and install it
with the star wheel at the bottom Install the parking brake shoe adjuster spring. See Figure 9.
13. Remove the previously installed tie strap and position the parking brake shoes into the anchor notches See Figure 10.
1. Using a suitable cutting tool cut the tie strap.
2. Remove the tie strap from the parking brake actuator and shoe anchor. This may require that the parking brake shoes be pulled slightly away
from the anchor to relieve the spring tension.
3. Position each of the parking brake shoes into the anchor notches.