ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Fuel/Ignition - Cold Start Stall/Stumble|Page 2446 > < Fuel/Ignition - Cold Start Stall/Stumble|Page 2444
Page 2
background image

WARRANTY STATUS: Reimbursable within the provisions of the Warranty and Policy Manual.
OPERATION: SP9539A84
TIME:

0.4 Hr. DLR. CODING: Basic Part No. DRIVE Code: F5

Technical Service Bulletin # 841718

Date: 840814

Engine - Dieseling When Turned OFF

Article No. 84-17-18

DIESELING - (2.0L/2.3L) - ENGINE

TEMPERATURE BELOW 160~ AND/OR A/C is ON - MANUAL OR AUTOMATIC TRANSMISSION

LIGHT TRUCKS 1983-84 RANGER

CALIBRATIONS: 3-49G-R17, 3-49T-R17, 3-49Y-R17, 3-49G-R20, 3-49T-R20, 3-49Y-R20, 3-49H-R16 and 17, 3-49S-R15 and 16 - 1983-84

Dieseling may occur on 2.0L and 2.3L engines when the ignition is turned off before the coolant temperature has reached 160 ~F, and on A/C equipped
vehicles, when the A/C is operating.

If engine dieseling occurs when the ignition key is turned off, perform the following:

^

Check engine idle RPM and set, if required, to specification shown on the vehicle emissions decal located on the radiator support.

^

If dieseling continues with the idle set to specification, replace the parts listed below.

For vehicles with 2.0L engines and manual transmission -

^

Replace Accelerator Cable Assembly with P/N E3TZ-9A758-E For vehicles with 2.3L engines and automatic transmission -

^

Replace the Accelerator Cable Assembly with P/N 9A758 and the kick down bellcrank with P/N 9K713. For vehicles with 2.3L engines and
manual transmission -

Fuel/Ignition - Cold Start Stall/Stumble|Page 2446 > < Fuel/Ignition - Cold Start Stall/Stumble|Page 2444