Ranger 4WD L4-2.3L VIN D (2002)
Valve Guide Seal: Service and Repair
Valve Seals
Special Tool(s)
Removal
1. Remove the camshafts.
^
Remove the valve tappets and place them in order to one side.
2. WARNING: Always wear protective goggles when working with compressed air. This can prevent injury. Failure to follow these
instructions may result in personal injury.
Unscrew the spark plug on cylinder No. 1 and connect the compressed air supply.
3. CAUTION: Use compressed air at 7 to 10 bars (100 - 150 psi).
NOTE: Place all parts in order to one side.
