Ranger 4WD L4-2.3L VIN D (2002)
3. Position the differential side gear and thrust washer assemblies in the differential case.
4. Lubricate the differential pinion thrust washers and differential pinion gears with rear axle lubricant.
5. Assemble the differential pinion thrust washers and the differential pinion gears.
6. Engage the differential pinion gears opposite the differential side gears. Rotate the differential pinion gears to align with the differential pinion
shaft bore.
7. Insert the differential pinion shaft.
-
Align the bolt hole in the differential pinion shaft with the bolt hole in the differential case.
