Ranger 4WD L4-2.3L VIN D (2002)
16. CAUTION: If new bolts to retain the driveshaft to the axle are not available, coat the threads of the original bolts with Threadlock and Sealer
E0AZ-19554-AA or equivalent meeting Ford specification WSK-M2G351-AS.
CAUTION: The driveshaft flange fits tightly on the rear axle pinion flange pilot. To make sure that the driveshaft flange seats squarely on the
pinion flange, tighten the bolts evenly in a cross pattern as shown.
To install, reverse the removal procedure.