Ranger 4WD V6-3.0L VIN U (1997)
8. Rotate torque converter and tool then reinstall into press with tool up.
9. Secure press. Apply enough force from press to seal tool into torque converter.
WARNING: ALWAYS FOLLOW PROPER SAFETY PROCEDURES WHILE USING PRESS.
10. Apply air pressure 80 psi (MAX) to valve on leak check tool.
NOTE: Use clean dry shop air.
11. With air pressure applied to valve, inspect for leaks at converter hub, seams and studs. A soap bubble solution may be applied around those areas
to aid in diagnosis. If leaks are present, replace converter.
