Ranger 4WD V6-3.0L VIN V Flex Fuel (1999)
Hood Latch: Service and Repair
REMOVAL
1. Raise and support the hood.
2. Position the hood latch aside.
1. Remove the bolts.
2. Position the hood latch aside.
NOTE: Mark the hood latch position prior to removal of the bolts.
3. Remove the hood latch.
1. Remove the hood latch cable conduit end fitting from the hood latch housing.
2. Remove the hood latch cable end fitting from the hood latch release lever.
3. Remove the hood latch.
INSTALLATION
1. To install, reverse the removal procedure.
-
Adjust the hood latch.