Ranger 4WD V6-3.0L VIN V Flex Fuel (1999)
2. CAUTION: Do not damage O-ring during installation. Do not press servo cover and O-ring past relief hole in case, or O-ring damage
may occur.
Install the overdrive band servo assembly into the transmission case.
^
Lubricate the overdrive band servo cover O-ring with petroleum jelly.
3. Use Servo Cover Compressor to install the overdrive band servo cover retaining ring.
1
Install the Servo Cover Compressor and compress the overdrive band servo cover.
2
Install the overdrive servo cover retaining ring.
4. Install the main control valve body.
5. Adjust the overdrive band.
6. Install the digital Transmission Range (TR) sensor.
7. Install the shift cable.
1
Install the shift cable.
2
Install the shift cable to the manual control lever.
8. Install the three-way catalytic converter.
9. Lower the vehicle.
10. Connect the battery ground cable.
11. Fill the transmission to the proper fluid level and check for proper transmission operation.
^
Use MERCON V Automatic Transmission Fluid XT-5-QM meeting Ford specification MERCON V.
