Ranger 4WD V6-3.0L VIN V Flex Fuel (1999)
Parking Pawl: Service and Repair
Removal
1. Disconnect the battery ground cable.
2. Raise and the support vehicle.
3. Remove the transmission fluid pan.
4. Remove the transmission fluid filter.
1
Remove the screw.
2
Remove the transmission fluid filter.
5. Remove wire loom guide and protector.
^
Carefully lift up on wire loom guide and protector and disengage the retaining pins from the solenoid clamps.
6. Disconnect the solenoid electrical connectors.
1
Disconnect shift solenoids SSB and CCS electrical connectors.
2
Disconnect the Torque Converter Clutch (TCC) solenoid electrical connector.
3
Disconnect the Electronic Pressure Control (EPC) solenoid electrical connector.
