Ranger 4WD V6-3.0L VIN V Flex Fuel (1999)
7. CAUTION: The TCC solenoid and converter modulator valve may pop out of its bore. This may damage the solenoid or converter
modulator valve.
Remove the EPC, SSB, and CCS solenoids.
1
Remove the wire harness.
2
Remove the screws.
3
Remove the solenoid clamp.
4
Remove the EPC, SSB, and CCS solenoids.
8. CAUTION: Do not pry on the other wires or damage to the connector case surface may result.
Disconnect the Turbine Shaft Speed (TSS) sensor electrical connector from the transmission case (16 pin) electrical connector.
1
Disconnect the TSS sensor electrical connector.
2
Remove the TSS sensor wire locator.
9. CAUTION: Do not overstretch the retaining spring.
Remove the transmission case (16 pin) electrical connector retaining spring.