Ranger 4WD V6-3.0L VIN V Flex Fuel (1999)
10. CAUTION: Do not damage the connector or harness.
Remove the transmission case (16 pin) electrical connector.
^
Compress the tabs on the transmission case (16 pin) electrical connector.
^
Push the transmission case (16 pin) electrical connector out of transmission case.
11. Remove the manual control valve detent lever spring.
1
Remove the screw.
2
Remove the manual control valve detent lever spring.
12. CAUTION: To avoid damage, make sure the wrench does not strike the manual valve inner lever pin.
Remove the nut.
13. Remove the manual valve inner lever and parking lever actuating rod.