Ranger 4WD V6-4.0L (2009)
Housing Assembly HVAC: Service and Repair
Evaporator Core Housing
Evaporator Core Housing
Removal and Installation
NOTE: The evaporator core is not separately serviceable, it is serviced only with the evaporator core housing assembly.
NOTE: If an evaporator core leak is suspected, the evaporator core must be leak tested before it is removed from the vehicle.
All vehicles
1. Drain the cooling system.
2. Recover the refrigerant.
3. Remove the Air Cleaner (ACL) outlet pipe.
4. Remove the suction accumulator. For additional information, refer to Suction Accumulator See: Accumulator HVAC/Service and Repair.
Vehicles with 2.3L engine
5. Remove the A/C compressor. For additional information, refer to Air Conditioning (A/C) Compressor - 2.3L See: Compressor HVAC/Service
and Repair.
6. Remove the engine oil indicator and tube.
Vehicles with 4.0L engine