Removal and Installation Removal | -
Detach the cover on the rear side of the headlamp. | | -
Remove the headlamp levelling motor (left-hand side shown). - Remove the headlamp levelling motor (bayonet fit).
| Installation | -
NOTE:Before installing the headlamp, check the operation of the headlamp levelling motor. Refit the components in the reverse order. | | -
NOTE:Move the headlamp levelling switch to the "0" position. Check the headlamp alignment. If necessary, align the headlamps. For additional information, refer to Section 417-01 Exterior Lighting. | | |