Taurus V6-182 3.0L DOHC SHO (1992)
Ignition Coil: Service and Repair
REMOVAL
1.
Disconnect spark plug wires from ignition coil.
2.
Disconnect engine harness electrical connector from ignition coil.
3.
Remove four ignition coil assembly retaining screws, then the coil. On vehicles with power steering, it may be necessary to remove lefthand
(intake) coil and bracket as an assembly.
INSTALLATION
1.
Mount ignition coil to bracket, tightening four retaining screws.
2.
Connect engine harness electrical connector to ignition coil.
3.
Install spark plug wires.
