Taurus V6-195 3.2L DOHC SHO (1994)
EGR Tube: Service and Repair
REMOVAL
^
Disconnect EGR pressure valve sensor hoses from EGR valve to exhaust manifold tube.
^
Disconnect EGR valve to exhaust manifold tube at EGR valve and exhaust manifold.
^
Remove EGR valve tube to manifold connector from exhaust manifold if required.
INSTALLATION
^
To install, reverse removal procedures. Tighten EGR valve to exhaust manifold tube nuts to 35-45 Nm (26-33 ft lb). Tighten EGR valve tube
to manifold connector to exhaust manifold to 45-65 Nm (33-48 ft lb). Tighten EGR valve to exhaust manifold tube to exhaust manifold bolts
to 15-23 Nm (11-17 ft lb).
