Taurus V6-195 3.2L DOHC SHO (1994)
Fuel Pressure Pulsation Damper: Service and Repair
REMOVAL
1. Disconnect battery ground cable.
NOTE: When the battery has been disconnected and reconnected, some abnormal drive symptoms may occur while the powertrain control
module relearns its adaptive strategy. The vehicle may need to be driven 10 miles or more to relearn the adaptive strategy.
2. Remove fuel filler cap and release fuel tank pressure.
3. Relieve the fuel system pressure, refer to Service and Repair / Fuel Pressure Relief Procedure.
4. Remove fuel injection pulse dampener from fuel injection supply manifold and fuel supply line. Discard sealing gaskets.
INSTALLATION
1. Install fuel injection pulse dampener through fuel supply line and into fuel injection supply manifold using new sealing gaskets. Tighten fuel
injection pulse dampener to 25-34 Nm (18-25 lb ft).
2. Install fuel cap at tank.
3. Connect battery ground cable.
4. Turn key ON/OFF several times without starting engine to check for fuel leaks.
5. Check all connections at fuel rails, push connect fittings, etc.
