Taurus V6-3.0L DOHC VIN S (2000)
Antenna: Service and Repair
Power Antenna
REMOVAL
1. Remove the audio unit. Refer to Radio, Stereo, and Compact Disc. See: Radio, Stereo, and Compact Disc/Service and Repair
2. Remove the antenna mast nut and stanchion.
3. Remove the nut and the bolt from inside the vehicle.
4. Lower the power antenna out from behind the quarter panel.
5. Disconnect the pin-type retainer for the lead-in cable.
6. Disconnect the electrical connector and lead-in cable and remove the antenna assembly.
INSTALLATION
1. To install, reverse the removal procedure
