ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2723 > < Initial Inspection and Diagnostic Overview|Page 2721
Page 51
background image

-

Is the resistance less than 5 ohms?

Yes

GO to S13.

No

CONNECT the battery ground cable. GO to S32.

-------------------------------------------------
S13 CHECK THE HS-CAN (+) AND HS-CAN (-) CIRCUITS FOR A SHORT TOGETHER WITH THE STEERING EFFORT CONTROL
MODULE (SECM) DISCONNECTED

-

Disconnect: SECM C2368.

-

Measure the resistance between the DLC C251-6, circuit VDB04 (WH/BU), harness side and the DLC C251-14, circuit VDB05 (WH), harness
side.

-

Is the resistance less than 5 ohms?

Yes

GO to S14.

No

CONNECT the battery ground cable. GO to S33.

-------------------------------------------------
S14 VERIFY VEHICLE EQUIPMENT - 4X4 CONTROL MODULE

-

Inspect the vehicle for 4X4.

-

Is the vehicle equipped with 4X4?

Yes

GO to S15.

No

GO to S16.

-------------------------------------------------
S15 CHECK THE HS-CAN (+) AND HS-CAN (-) CIRCUITS FOR A SHORT TOGETHER WITH THE 4X4 CONTROL MODULE
DISCONNECTED

-

Disconnect: 4X4 Control Module C281.

-

Measure the resistance between the DLC C251-6, circuit VDB04 (WH/BU), harness side and the DLC C251-14, circuit VDB05 (WH), harness
side.

Initial Inspection and Diagnostic Overview|Page 2723 > < Initial Inspection and Diagnostic Overview|Page 2721