Taurus X FWD V6-3.5L (2008)
10. Install the OCSM.
1
Position the OCSM and install the rivets.
2
Connect the electrical connector.
-
The OCSM must be correctly positioned and securely riveted in place. Failure to do so may set a DTC in the RCM.
Power seats with an OCS system service kit
11. Tie strap the unused OCS system pressure sensor electrical connector to the seat wiring harness.
Seats with an OE OCS
12. Install the OCSM and rivets to the cushion frame bracket.
-
The OCSM must be correctly positioned and securely riveted in place. Failure to do so may set a DTC in the RCM.
13. Connect the OCSM electrical connector.
