Taurus X FWD V6-3.5L (2008)
Manual seat
11. Remove 2 screws, pull and remove the recliner outer cover.
-
Route the backrest release pull strap through the cover opening.
12. WARNING: Use care when the seat back frame is removed and when releasing the recliners from a backrest upright position. The
recliners are spring-loaded, which may cause the recliner upper arms to fold with significant speed/force. Failure to follow this
instruction may result in serious personal injury.
NOTE: Note cable routing for installation.
Remove the 2 cables from the recliner and route them out of the seat cushion frame.
All seats
13. Remove the 6 cushion frame-to-seat track nuts and remove the seat track.
-
If equipped, detach the electrical connector from the seat track.
-
To install, tighten to 23 Nm (17 lb-ft).
14. To install, reverse the removal procedure.
