Taurus X FWD V6-3.5L (2008)
4. Position the safety canopy module and install the safety canopy module spear into the sheet metal.
5. NOTE: Make sure all safety canopy module bolt holes line up with all J-clips.
Install the safety canopy module center bolt in the position next to the safety canopy hook.
-
Tighten to 7 Nm (62 lb-in).
6. NOTE: Make sure all safety canopy module bolt holes line up with all J-clips.
Install the safety canopy module center bolt.
-
Tighten to 7 Nm (62 lb-in).
7. Install the safety canopy module bolt and the 2 pin-type retainers to the A-pillar trim bracket.
-
Tighten to 7 Nm (62 lb-in).
8. NOTE: Make sure all safety canopy module bolt holes line up with all J-clips.
Install the 2 safety canopy module rear bolts.
-
Tighten to 7 Nm (62 lb-in).
9. Install the safety canopy module front tether bracket bolt and the 2 pin-type retainers to the A-pillar trim bracket.
-
Tighten to 9 Nm (80 lb-in).