Taurus X FWD V6-3.5L (2008)
3. Insert the halfshaft into the wheel hub.
4. Rotate the knuckle into position.
5. Install the bolt in the brake tube bracket.
^
Tighten to 30 Nm (22 lb-ft).
6. Install the 2 scrivets in the rubber shield.
7. Install the ball joint in the knuckle and install the ball joint nut.
^
Tighten to 110 Nm (81 lb-ft).
8. Using a suitable tool, install the halfshaft in the wheel hub.
