Thunderbird V8-302 5.0L HO (1992)
11. Install rear insulator with small end toward control arm.
12. Install washer and cup facing rear of vehicle.
13. Return torsion strut-to-sub-frame nut to original position.
14. Install lower shock bolt and nut.
15. Holding tension strut with wrench, tighten strut to sub-frame to specification.
16. Tighten tension strut to lower control arm attaching nut to specification.
17. Install brake hose bracket, tighten to specifications.
18. Install ABS sensor, tighten to specifications.
19. Install tire and wheel assembly, check front wheel alignment.