ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
In-vehicle Repair|Valves > < Valve Seals

Transit.Tourneo Connect 2002.5 (06.2002-)

Engine - 1.8L Duratec-DOHC (Zetec) - Valve Springs Transit/Tourneo Connect 2002.5 (06/2002-)
In-vehicle Repair

Special Tool(s)

Valve Spring Compressor

303-361A (21-155 A)

Adapter for 303-361A

303-361-02 (21-155-02)

Connector, Air Supply (Cylinder Head)

303-363 (21-157)
Materials
Name
Specification
Engine oil
WSS-M2C912-A1 

Removal

  1. Remove the camshafts.
    For additional information, refer to Camshafts in this section.
    • Remove the valve tappets and lay them in order, to one side.

  1. WARNING:
    WARNING:Always wear protective goggles when working with compressed air. Failure to do so can result in injury.
    Remove the spark plug from cylinder no. 1 and attach the special tool.

  1. CAUTION:
    CAUTION:Use compressed air at 7 to 10 bar.
    Attach the special tools and apply compressed air to the cylinder.
    1. Compress the valve spring.
    1. Remove the valve collets.
    • Take out the valve spring retainer and the valve spring.

Installation
  1. NOTE:
    NOTE:Check that the valve collets are correctly seated.
    Install the valve springs with the valve spring retainers.
    1. Compress the valve springs.
    1. Install the valve collets.
  1. Detach Special Tool 303-363 and screw in the spark plug.
  1. Repeat the operations for all the other cylinders.
  1. Coat the valve tappets with engine oil and insert.
  1. Install the camshafts.
    For additional information, refer to Camshafts in this section.

In-vehicle Repair|Valves > < Valve Seals